Netis p116gh 16 fe poe+2ge uplink poe switch
Netis p116gh 16 fe poe+2ge uplink poe switch
SPECIFICATION
Hardware | |
Interface | 16*10/100Mbps POE ports(Data/Power) 2*10/100/1000M uplink RJ45 ports (Data) 1*10/100/1000M uplink SFP slot port (Data) |
Basic function | Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching schemeSupport IEEE802.3X full duplex and Backpressure half duplex MAC addresses auto-learning & auto-aging |
Standards | IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast EthernetIEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control |
Mode | Normal switch mode/Extend mode |
Data Transfer Rate | Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex) Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex) |
Store & Forwarding | Yes |
Switching Capacity | 9.2G |
MAC Address Table Size | 8K |
Jumbo Frame | 2048 byte |
Environment | Operation Temperature:0℃~40℃ Storage Temperature:-40℃~70℃ Operation Humidity:10%~90% RH Non-condensing Storage Humidity:5%~90% RH Non-condensing |
Power Input POE Standards | Single port maximum power 30W,
The whole switch's maximum power is 200W Support over-current,over-voltage, and short-circuit protection Support Soft Start of High Power PD Support sequential boot-up Power Supply Pin:12+/36- AC 110~240V 50/60HZ |
Cabling type | 100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m) |
Dimensions (L x W x H ) | 280mm*180mm*43mm |
Netis P116GH is a high-performance PoE switch designed to provide reliable and efficient connectivity for small to medium-sized networks. With 16 fast Ethernet ports and 2-gigabit uplink ports, this switch is perfect for businesses that require high-speed data transfer and reliable power distribution. Equipped with Power over Ethernet (PoE) technology, the P116GH can power up to 16 PoE devices such as IP cameras, access points, and VoIP phones, without the need for additional power cables. This not only simplifies installation but also reduces the overall cost of the network setup. The switch features a compact design and is easy to install and configure. The web-based management interface provides a user-friendly dashboard that allows network administrators to monitor network performance, configure VLANs, and manage bandwidth allocation.
The Netis P116GH PoE switch is a versatile and reliable solution for businesses that require high-speed connectivity and power distribution. Its compact design and user-friendly interface make it an ideal choice for small to medium-sized networks. Netis P116GH is a high-performance PoE switch designed for small to medium-sized businesses looking to expand their network connectivity. With 16 Fast Ethernet PoE ports, this switch can power and connect a variety of PoE-enabled devices such as IP cameras, wireless access points, and VoIP phones. In addition to the 16 PoE ports, the Netis P116GH also features2 Gigabit Ethernet uplink ports, allowing for high-speed connections to other switches or network devices. The switch is capable of delivering up to 30 watts of power per PoE port, ensuring that even the most demanding PoE devices can be powered efficiently.
The Netis P116GH also features advanced VLAN and QoS functions, allowing for improved network management and traffic prioritization. The switch is easy to install and manage, with a user-friendly web interface and SNMP support for remote management. Overall, the Netis P116GH is an excellent choice for businesses looking to expand their network connectivity and power PoE-enabled devices with ease and efficiency.
Netis P116GH16 FE POE2GE Uplink POE Switch is a powerful and reliable networking tool designed for small and medium-sized businesses. With 16 fast Ethernet ports and 2 gigabit Ethernet uplink ports, this switch provides high-speed connectivity for all your devices and enables you to easily expand your network as your business grows. The POE (Power over Ethernet) feature allows you to power your devices such as VoIP phones, IP cameras, and wireless access points through the Ethernet cables, eliminating the need for separate power cords and adapters. This not only reduces clutter but also helps save energy and reduces costs. The switch is easy to install and comes with a plug-and-play design that requires no configuration or setup. It supports various networking protocols such as VLAN, QoS, and IGMP Snooping, making it ideal for video surveillance, VoIP, and other bandwidth-intensive applications. With sturdy metal housing and a fanless design, this switch is built to last and operates silently, making it an ideal choice for noise-sensitive environments.
The Netis P116GH16 FE POE2GE Uplink POE Switch is an affordable and efficient solution for your networking needs, providing high-performance and reliable connectivity for your business. Netis P116GH is a high-performance PoE switch designed for small to medium-sized businesses and enterprises. With 16 Fast Ethernet PoE ports and 2 Gigabit Ethernet uplink ports, this switch provides reliable and efficient connectivity for all of your network devices.
The P116GH supports IEEE802.3af/at standards, delivering up to 30 watts of power per PoE port for powering PoE-enabled devices such as IP cameras, VoIP phones, and wireless access points. The total PoE power budget of the switch is 135W. With compact and durable metal housing, the P116GH is built to withstand harsh environments and provide long-lasting performance. It also features a fanless design for quiet operation and reduced power consumption. The switch is easy to set up and manage, with a user-friendly web-based interface that allows for remote management and configuration. It also supports VLAN, QoS, and IGMP snooping for efficient network management. Overall, the Netis P116GH is a reliable and cost-effective solution for businesses looking to expand their network and power their PoE-enabled devices.
Netis P116GH16 FE POE2GE Uplink POE Switch is the perfect solution for small to medium-sized businesses or homes that require a reliable and efficient network switch. This switch is equipped with16 Fast Ethernet ports, each capable of providing up to 30 of power over Ethernet (POE), allowing you to power and connect your PoE-enabled devices, such as IP cameras, VoIP phones, and access points, without the need for separate power supplies. In addition, the P116GH also features2 Gigabit Ethernet uplink ports, allowing you to connect to higher-speed networks or devices, such as servers or network-attached storage (NAS) devices. This feature provides faster data transfer rates and eliminates network bottlenecks, ensuring smooth and stable network performance.
The Netis P116GH switch is easy to install, with plug-and-play functionality and a user-friendly web interface that allows for easy configuration and monitoring of the network. It also features advanced security features, such as port-based VLAN and IP-based ACL, to protect your network from unauthorized access. Overall, the Netis P116GH16 FE POE2GE Uplink POE Switch is an affordable, reliable, and efficient solution for small to medium-sized businesses or homes that require a powerful and secure network switch.
Netis P116GH is a high-performance 16-port PoE switch that comes equipped with two Gigabit Ethernet uplink ports. This device is designed to deliver reliable and efficient network connectivity to your home or office. With its Power over Ethernet (PoE) capability, you can easily power up to 16 PoE-enabled devices such as IP cameras, access points, and VoIP phones without the need for additional power supply units. This switch features a user-friendly web-based management interface that allows you to easily configure and monitor the network settings. It supports IEEE802.3af/at standards for PoE, ensuring compatibility with a wide range of PoE devices. You can also control the power supply of each port individually through the management interface, giving you greater flexibility and control over the network.
The Netis P116GH is built with a sturdy metal casing, ensuring durability and longevity. It also supports a variety of advanced features such as VLAN, QoS, and IGMP Snooping for optimized network performance. With its compact design and easy-to-install features, the Netis P116GH is an excellent choice for home and small office networks looking for a reliable and cost-effective PoE switch solution. Netis P116GH16 FE PoE2GE Uplink PoE Switch is the ultimate solution for businesses and organizations looking to improve their network infrastructure. This switch is designed to provide high-speed connectivity and power over Ethernet to network devices such as IP cameras, VoIP phones, and access points. With its 16 Fast Ethernet ports, Netis P116GH can easily accommodate multiple devices and support data transfer speeds of up to 100Mbps. Additionally, the switch features2 Gigabit Ethernet uplink ports that allow you to connect to other switches or network devices seamlessly. One of the main features of the Netis P116GH is its PoE support. It features 16 PoE ports that can deliver up to 30W of power to connected devices. This means that you can connect PoE-enabled devices without the need for additional power sources, simplifying your network setup and reducing costs.
The Netis P116GH also boasts a user-friendly design, with an easy-to-use web interface that allows you to configure and manage your network settings effortlessly. You can also customize your network settings to prioritize traffic and enhance security. In summary, the Netis P116GH16 FE PoE2GE Uplink PoE Switch is a reliable and cost-effective solution for businesses looking to expand and improve their network infrastructure. Its powerful features, including PoE support, high-speed connectivity, and user-friendly design, make it a top choice for any organization looking to optimize its network performance.
Netis P116GH16 FE POE2GE Uplink POE Switch is an essential networking device designed to meet the needs of small to medium-sized businesses. This switch features 16 Fast Ethernet ports that support Power over Ethernet (POE) technology, allowing you to power connected devices such as IP cameras, wireless access points, and VoIP phones through the Ethernet cable. The two Gigabit Ethernet uplink ports provide high-speed connectivity to other switches and routers, ensuring smooth data transfer and network performance.
The Netis P116GH switch is easy to install and configure, thanks to its user-friendly web-based interface and intuitive management software. You can easily monitor and control your network traffic, set up VLANs, and prioritize traffic according to your preferences. The switch also supports IEEE802.3af/at standards, ensuring compatibility with a wide range of POE devices. Built with high-quality components and advanced features, the Netis P116GH switch delivers reliable and efficient performance for your network. Its sturdy metal casing and fanless design ensure durability and quiet operation, making it ideal for use in offices, classrooms, hotels, and other environments. Whether you need to expand your network or upgrade your existing setup, the Netis P116GH16 FE POE2GE Uplink POE Switch is a smart choice for your business. Netis P116GH is a powerful and reliable POE switch that is designed to meet the needs of small to medium-sized businesses. With 16 Fast Ethernet ports, this switch is capable of delivering high-speed data transfer rates of up to 100Mbps, making it ideal for businesses that require fast and reliable network connectivity. The switch also features2 Gigabit Ethernet uplink ports, which provide even faster data transfer rates of up to 1000Mbps, ensuring that your network is always operating at peak performance. Additionally, the P116GH is equipped with POE (Power over Ethernet) technology, which allows you to power up to 16 POE-enabled devices, such as IP phones, cameras, and wireless access points, with a single switch. With its compact design and easy installation process, the Netis P116GH is the perfect solution for businesses that require a reliable and cost-effective network switch. Whether you need to connect multiple devices in your office or provide power to your POE-enabled devices, this switch is designed to meet your needs and exceed your expectations. So why wait? Upgrade your network today and experience the benefits of the Netis P116GH POE switch.
Netis P116GH16 FE POE2GE Uplink POE Switch is a high-performance networking solution that is ideal for small to medium-sized businesses. This switch is designed to provide reliable and seamless connectivity to all your network devices, including IP cameras, wireless access points, and VoIP phones. The switch comes with 16 Fast Ethernet ports, all of which support Power over Ethernet (POE), allowing you to power and connect your devices with a single Ethernet cable. This eliminates the need for separate power supplies, making your installation more cost-effective and efficient. In addition to the 16 POE ports, the switch also features two Gigabit Ethernet uplink ports, which provide high-speed connectivity to your network backbone. This ensures that your network devices can communicate with each other quickly and seamlessly.
The Netis P116GH switch is easy to install and manage, thanks to its user-friendly web interface and SNMP support. You can easily monitor and manage your network traffic, set up VLANs and QoS, and configure security features such as Access Control Lists (ACLs) and port security. Overall, the Netis P116GH16 FE POE2GE Uplink POE Switch is a reliable and cost-effective networking solution that provides seamless connectivity to all your network devices. Whether you're setting up a new network or expanding an existing one, this switch is an excellent choice.
Warranty: 01 Year