Cisco C1000-24FP-4G-L Switch
Cisco C1000-24FP-4G-L Switch
SPECIFICATION
Description | 24x 10/100/1000 Ethernet PoE+ ports and 370W PoE budget, 4x 1G SFP uplinks |
Gigabit Ethernet ports | 24 |
Uplink interfaces | 4 SFP |
PoE+power budget | 370W |
Fanless | N |
Dimensions (WxDxH) | 17.5 x 13.59 x 1.73 |
Console Ports | |
RJ-45 Ethernet | 1 |
USB mini-B | 1 |
USB-A port for storage and Bluetooth console | 1 |
Memory and Processor | |
CPU | ARM v7 800 MHz |
DRAM | 512 MB |
Flash memory | 256 MB |
Performance | |
Forwarding bandwidth | 28 Gbps |
Switching bandwidth | 56 Gbps |
Forwarding rate(64—byte L3 packets) | 41.67 Mpps |
Unicast MAC addresses | 16000 |
IPv4 unicast direct routes | 542 |
IPv4 unicast indirect routes | 256 |
IPv6 unicast direct routes | 414 |
IPv6 unicast indirect routes | 128 |
IPv4 static routes | 16 |
IPv6 static routes | 16 |
IPv4 multicast routes and IGMP groups | 1024 |
IPv6 multicast groups | 1024 |
IPv4/MAC security ACEs | 600 |
IPv6 security ACEs | 600 |
Maximum active VLANs | 256 |
VLAN IDs available | 4094 |
Maximum STP instances | 64 |
Maximum SPAN sessions | 4 |
MTU-L3 packet | 9198 bytes |
Jumbo Ethernet frame | 10,240 bytes |
Dying Gasp | Yes |
MTBF in hours (data) | 2,026,793 |
MTBF in hours (PoE) | 698,220 |
MTBF in hours (Full PoE) | 698,220 |
Environmental | |
Operating temperature Seal level | -5 to 50 deg C* |
Up to 5,000ft (1500 m) | -5 to 45 deg C |
Up to 10,000 (3000 m) | -5 to 40 deg C |
Operating altitude | 10,000 ft (3,000m) |
Operating relative humidity | 5% to 90% at 40C |
Storage temperature | -13 to 158F (-25 to 70C) |
Storage altitude | 15,000 ft (4500m) |
Storage relative humidity | 5% to 95% at 65C |
*Note: 50C operation is supported for short term operation only; GLC-BX-D/U and CWDM optics cannot support 50C operation; Minimum ambient temperature for cold start is at 0C (32F) | |
Safety and Compliance | |
Safety | UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1, IEC 62368-1, UL 62368-1 GB 4943.1-2011 |
EMC: Emissions
| 47CFR Part 15 Class A, AS/NZS CISPR32 Class A, CISPR32 Class A, EN55032 Class A, ICES-003 Class A, VCCI-CISPR32 Class A, EN61000-3-2, EN61000-3-3, KN32 Class A, CNS13438 Class A |
EMC: Immunity | EN55024 (including EN 61000-4-5), EN300386, KN35 |
Environmental | Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU |
Telco | Common Language Equipment Identifier (CLEI) code |
U.S. government certifications | TBD |
Connectors and Interfaces | |
Ethernet interfaces
| * 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted Pair (UTP) cabling * 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling * 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling * 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling |
Indicator LEDs
| * Per-port status: link integrity, disabled, activity * System status: system |
Console cables
| * CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45 * CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors |
Power
| * Use the supplied AC power cord to connect the AC power connector to an AC power outlet * Models have the external power supply |
Cisco C1000-24FP-4G-L Switch is a high-performance and reliable network switch that provides advanced features and functionalities for modern networks. It is designed for small and medium-sized businesses that require a powerful and scalable network solution that can handle the increasing demands of their applications and services.
This switch comes with 24 Gigabit Ethernet ports that provide fast and reliable connectivity for all your devices, as well as four1G SFP uplinks that enable you to connect to other switches or devices over fiber-optic cables. Additionally, it supports Power over Ethernet (PoE) and PoE+ technology, which allows you to power your network devices directly from the switch, eliminating the need for separate power cables and adapters.
The Cisco C1000-24FP-4G-L Switch is also equipped with advanced security features such as MAC address filtering, port security, and access control lists (ACLs) that help protect your network from unauthorized access and malicious attacks. It also supports Quality of Service (QoS) and VLANs, which enable you to prioritize your network traffic and segment your network for better performance and security. With its intuitive web-based management interface, the Cisco C1000-24FP-4G-L Switch is easy to set up and configure, even for non-technical users.
It also supports Cisco Network Assistant (CNA) and Cisco Prime Infrastructure, which provide centralized management and monitoring of your network devices. Overall, the Cisco C1000-24FP-4G-L Switch is a powerful and versatile network switch that delivers high-performance, reliable, and secure connectivity for your business applications and services. Its advanced features and functionalities make it an ideal solution for small and medium-sized businesses that require a cost-effective and scalable network solution. Cisco C1000-24FP-4G-L Switch is a high-performance Ethernet switch designed to meet the growing demands of small to medium-sized businesses.
With 24 Gigabit Ethernet ports, this switch provides fast and reliable connectivity for all of your network devices. It also features four Gigabit SFP uplink ports, connecting you to other switches or devices with fiber-optic cables. One of the standout features of the Cisco C1000-24FP-4G-L Switch is its support for Power over Ethernet (PoE), which allows you to power your network devices through the Ethernet cables themselves. This makes it easy to deploy devices such as IP phones, wireless access points, and security cameras without the need for separate power cables.
The switch also features advanced security features, including support for 802.1X authentication, MAC address filtering, and Access Control Lists (ACLs). This helps to ensure that only authorized devices are able to access your network, keeping your data and devices safe from unauthorized access. The Cisco C1000-24FP-4G-L Switch is easy to deploy and manage, with a user-friendly web interface and support for Cisco's Network Assistant software. It also includes a range of management features, including VLANs, QoS, and SNMP, giving you greater control over your network. Overall, the Cisco C1000-24FP-4G-L Switch is an excellent choice for small to medium-sized businesses looking for a reliable, high-performance Ethernet switch with advanced security features and support for PoE. Cisco C1000-24FP-4G-L switch is a high-performance, reliable, and easy-to-use networking solution that delivers advanced features and functionality for small to medium-sized businesses.
This switch provides24 Gigabit Ethernet ports,4 Gigabit Ethernet uplink ports, and24 Power over Ethernet (PoE) ports with a total power budget of up to195W, making it ideal for powering IP phones, wireless access points, and other PoE-enabled devices. With a forwarding capacity of up to 38.69 Mpps and a switching capacity of up to 52 Gbps, the Cisco C1000-24FP-4G-L switch provides fast data transfer rates and ensures smooth and uninterrupted network performance. It also features advanced security features such as Access Control Lists (ACLs), port security, and DHCP snooping, which help protect your network from unauthorized access and attacks.
The Cisco C1000-24FP-4G-L switch comes with an intuitive web-based management interface, which makes it easy to deploy, configure, and manage your network. It also supports Cisco's Network Assistant tool, which allows you to manage multiple switches from a single location, making network administration more efficient. Overall, the Cisco C1000-24FP-4G-L switch is a powerful, reliable, and cost-effective networking solution that provides advanced features and functionality for small to medium-sized businesses. With its PoE capabilities, fast data transfer rates, and advanced security features, this switch is an excellent choice for businesses looking to improve their network performance and security.
The Cisco C1000-24FP-4G-L switch is a high-performance network switch designed for small to medium-sized businesses. It features 24 Gigabit Ethernet ports and 4 Gigabit Ethernet SFP ports, making it a versatile solution for connecting a variety of devices to your network. This switch is powered by Cisco's advanced networking technology, which provides reliable and secure performance. It supports advanced network features such as VLAN, QoS, and Link Aggregation Control Protocol, which ensure that your network traffic is prioritized and managed efficiently. The Cisco C1000-24FP-4G-L switch is also designed with energy efficiency in mind. It features Energy-Efficient Ethernet (EEE) and Energy Detect technology, which automatically adjusts power consumption based on the length of the cable and the traffic load, reducing energy costs and environmental impact.
This switch is easy to set up and manage with Cisco's intuitive web-based interface. It also supports the Cisco Network Assistant software, which provides a centralized tool for network management and troubleshooting. Overall, the Cisco C1000-24FP-4G-L switch is a reliable, high-performance solution for businesses looking to improve their network connectivity and efficiency. Cisco C1000-24FP-4G-L Switch is a reliable and efficient network switch designed to meet the demands of small to medium-sized businesses. It features 24 ports, which can support up to 1 Gbps data transfer rates, allowing for lightning-fast connectivity between devices. This switch is also equipped with four Gigabit Ethernet uplinks, providing a high level of flexibility and scalability for your network. It also comes with Power over Ethernet (PoE) capabilities, allowing you to power devices such as VoIP phones, access points, and security cameras directly from the switch.
The Cisco C1000-24FP-4G-L Switch is easy to install and configure, thanks to its intuitive web-based interface. It also comes with advanced security features such as VLANs, Access Control Lists (ACLs), and port security, ensuring that your network is protected from unauthorized access. Overall, the Cisco C1000-24FP-4G-L Switch is a versatile and reliable solution for businesses looking to upgrade their network infrastructure. With its high-speed connectivity, PoE capabilities, and advanced security features, it is the ideal choice for any organization looking to improve its network performance and security. Cisco C1000-24FP-4G-L Switch is a high-performance, reliable, and secure switch that delivers advanced networking capabilities to small and medium-sized businesses. With 24 Gigabit Ethernet ports,4 Gigabit Ethernet SFP ports, and Power over Ethernet (PoE) support, this switch provides a flexible and cost-effective solution for connecting devices such as IP phones, cameras, and wireless access points. The C1000-24FP-4G-L Switch offers advanced security features such as Access Control Lists (ACLs),802.1X authentication, and port security to protect your network from unauthorized access and potential threats. It also supports advanced Quality of Service (QoS) features to prioritize network traffic and ensure that critical applications receive the necessary bandwidth. This switch is easy to set up and manage with Cisco's intuitive web-based interface or Cisco Network Assistant software. It also supports Cisco's EnergyWise technology, which enables you to monitor and manage the power consumption of your network devices, reducing your energy costs and carbon footprint. Overall, the Cisco C1000-24FP-4G-L Switch is an excellent choice for small and medium-sized businesses that require a reliable and secure network infrastructure to support their growing needs. With its advanced features, ease of use, and cost-effective pricing, this switch provides great value for your investment. Cisco C1000-24FP-4G-L Switch is a powerful and reliable network switch designed to provide high-speed connectivity and advanced network management features. With 24 Gigabit Ethernet ports and four Gigabit SFP ports, this switch is ideal for small to medium-sized businesses looking to improve their network performance.
This switch is equipped with Power over Ethernet (PoE) technology, which allows you to power devices such as IP phones, wireless access points, and security cameras directly from the switch, without the need for additional power cables. This helps to simplify your network infrastructure and reduce the overall cost of ownership.
The Cisco C1000-24FP-4G-L Switch also features advanced security features such as Access Control Lists (ACLs),802.1x authentication, and port security, which help to protect your network against unauthorized access and potential security threats. Additionally, this switch supports advanced QoS (Quality of Service) features, enabling you to prioritize network traffic and ensure that critical applications receive the necessary bandwidth.
The switch is easy to set up and manage, with an intuitive web-based interface that allows you to configure and monitor the switch from anywhere on your network. It also supports SNMP (Simple Network Management Protocol) and RMON (Remote Monitoring) for centralized management and monitoring. Overall, the Cisco C1000-24FP-4G-L Switch is an excellent choice for small to medium-sized businesses looking to improve their network performance and security. Its advanced features and ease of use make it a great investment for any organization looking to build a reliable and efficient network infrastructure. Cisco C1000-24FP-4G-L Switch is a powerful and reliable network switch designed for small to medium-sized businesses. It comes equipped with 24 PoE+ (Power over Ethernet Plus) ports that provide high-speed data transfer and power to connected devices.
This switch is also equipped with four Gigabit Ethernet uplink ports that offer fast connectivity to other devices and networks. With its advanced security features, including 802.1X authentication and access control lists, the Cisco C1000-24FP-4G-L Switch provides a secure and protected network environment.
The Cisco C1000-24FP-4G-L Switch is also easy to manage, with Cisco's intuitive web-based interface and Cisco DNA Center integration. This allows for easy network management and monitoring, as well as simplified deployment and configuration. Overall, the Cisco C1000-24FP-4G-L Switch is a reliable and high-performance switch that provides a seamless networking experience for small to medium-sized businesses. Cisco C1000-24FP-4G-L Switch is a powerful and reliable network switch that provides advanced features and capabilities for small to medium-sized businesses. With 24 Gigabit Ethernet ports and 4 Gigabit SFP ports, this switch delivers high-speed connectivity and exceptional performance for your network.
This switch features advanced Layer2 switching capabilities, including VLANs, Rapid Spanning Tree Protocol (RSTP), Link Aggregation Control Protocol (LACP), and Quality of Service (QoS). These features ensure that your network traffic is routed efficiently, with minimal latency and maximum throughput. The Cisco C1000-24FP-4G-L Switch also offers advanced security features, including Access Control Lists (ACLs),802.1X authentication, and MAC address filtering. These features help to protect your network from unauthorized access and ensure that your data is secure. In addition to its advanced features and capabilities, this switch is also easy to deploy and manage. It supports a variety of management protocols, including SNMP, Telnet, and HTTP/HTTPS. It also includes an intuitive web-based interface that makes it easy to configure and monitor your network. Overall, the Cisco C1000-24FP-4G-L Switch is an excellent choice for small to medium-sized businesses that require a powerful and reliable network switch. With its advanced features and capabilities, it delivers exceptional performance and security, while also being easy to deploy and manage. Cisco C1000-24FP-4G-L Switch is a powerful and reliable network switch designed for small to medium-sized businesses. It features twenty-four10/100/1000 Gigabit Ethernet ports, four Gigabit SFP uplinks, and fully supports Power over Ethernet (PoE) with a total power budget of 195W.
This switch is ideal for powering devices such as IP phones, wireless access points, and security cameras. The Cisco C1000-24FP-4G-L Switch also comes with advanced security features such as access control lists (ACLs) and port security to help protect your network from unauthorized access and attacks. It also supports Quality of Service (QoS) to prioritize network traffic and ensure the smooth operation of critical applications.
This switch is easy to install and manage thanks to its intuitive web-based user interface and Cisco's industry-leading network management tools. It also supports Cisco DNA Center, which allows for simplified network management and automation. Overall, the Cisco C1000-24FP-4G-L Switch is a reliable and feature-rich solution for small to medium-sized businesses looking to upgrade their network infrastructure. It provides high-speed connectivity and advanced security features while being easy to manage and maintain.
Warranty: 01 Year