NETIS P110C 8POE+2RJ45 10 Ports STANDARD POE SWITCH
Please sign in so that we can notify you about a reply
NETIS P110C 8POE+2RJ45 10 Ports STANDARD POE SWITCH
SPECIFICATION
| Hardware | |
| Interface | 8*10/100Mbps POE ports（Data/Power) 2*10/100M uplink RJ45 ports (Data) |
| Basic function | Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching schemeSupport IEEE802.3X full duplex and Backpressure half duplex MAC addresses auto-learning & auto-aging |
| Standards | IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast EthernetIEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control |
| Mode | Normal switch mode/Extend mode |
| Data Transfer Rate | Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex) Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex) |
| Store & Forwarding | Yes |
| Switching Capacity | 2G |
| MAC Address Table Size | 2K |
| Jumbo Frame | 2048 byte |
| Environment | Operation Temperature：0℃～40℃ Storage Temperature：-40℃～70℃ Operation Humidity：10%～90% RH Non-condensing Storage Humidity：5%～90% RH Non-condensing |
| Power Input POE Standards | Single port maximum power 30W,
The whole switch's maximum power is 120W Support over-current,over-voltage, and short-circuit protection Support Soft Start of High Power PD Support sequential boot-up Power Supply Pin:12+/36- AC 110~240V 50/60HZ |
| Cabling type | 100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m) |
| Dimensions (L x W x H ) | 190mm*140mm*43mm |
NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is an efficient and reliable switch designed for small to medium-sized businesses that require high-speed connectivity and Power over Ethernet (PoE) capabilities. This switch features eight PoE ports and two standard RJ45 ports, allowing you to connect up to ten devices simultaneously. With a total PoE power budget of 96W, this switch can deliver up to 30W of power per port, enabling you to power PoE-enabled devices such as IP cameras, wireless access points, and VoIP phones without the need for additional power sources. This makes the NETIS P110C a cost-effective solution for businesses that want to reduce their power consumption and simplify their network infrastructure.
The NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH supports IEEE802.3af and 802.3at standards, ensuring compatibility with a wide range of PoE-enabled devices. It also features plug-and-play installation, making it easy to set up and use without any technical expertise. This switch is housed in a sturdy metal casing that provides excellent durability and heat dissipation, ensuring reliable and long-lasting performance. It also features LED indicators that display the status of each port, allowing you to monitor your network activity and troubleshoot any issues quickly. In conclusion, the NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is an ideal solution for businesses looking for a high-performance, cost-effective, and easy-to-use switch that supports PoE-enabled devices. Its compact design and advanced features make it an excellent choice for small to medium-sized businesses looking to upgrade their network infrastructure.
NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is a high-performance Ethernet switch designed for use in small to medium-sized networks. With 10 Ethernet ports, this switch provides ample connectivity for a variety of devices such as computers, printers, and IP cameras. The P110C model is equipped with eight Power over Ethernet (PoE) ports, which means that it can provide power and data to connected PoE-enabled devices. This feature eliminates the need for separate power cables and simplifies installation, making it ideal for businesses and organizations that need to deploy multiple devices in different locations. In addition, the P110C switch is designed to support standard PoE, which means that it can work with a wide range of PoE-enabled devices regardless of the manufacturer. This switch also supports IEEE802.3af/at standards, which can deliver up to 30W of power per port, allowing it to power devices such as pan-tilt-zoom (PTZ) cameras and wireless access points.
The P110C switch also features auto-negotiation and auto-MDI/MDIX technologies, which allow it to automatically adjust to the speed and duplex mode of connected devices. This feature ensures reliable and efficient communication between devices. Finally, the P110C switch is compact and easy to install, making it an ideal choice for businesses and organizations that need to quickly and easily expand their network infrastructure. Whether you need to connect computers, printers, or IP cameras, the NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is a reliable and cost-effective solution. NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is a high-quality networking device that offers reliable connectivity and power management for your business or home network. This switch features eight PoE ports that can power compatible devices such as IP cameras, IP phones, and wireless access points. The two RJ45 ports provide additional connectivity options for non-PoE devices. With a total of 10 ports, this switch can easily handle the demands of a small to medium-sized network.
The NETIS P110C is designed to meet the IEEE802.3af/at standard, which ensures compatibility with a wide range of PoE-enabled devices. The switch also supports auto-negotiation and auto MDI/MDIX, making it easy to set up and use. This PoE switch is built with a durable metal casing that provides excellent heat dissipation and protection against damage. The compact design allows for easy installation in tight spaces, and the included mounting brackets make it simple to mount the switch to a wall or rack. Overall, the NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is an ideal choice for businesses or home users who need a reliable and efficient PoE switch that can handle multiple devices. With its advanced features, compact design, and easy installation, this switch is a great investment for any network. NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is a high-performance networking device that allows you to connect up to ten different devices to your network. With eight Power over Ethernet (PoE) ports and two standard RJ45 ports, this switch is perfect for businesses that need to power multiple devices, such as IP cameras, wireless access points, and VoIP phones.
The NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is designed with a compact and sturdy metal casing, ensuring that it can withstand tough conditions and last for years. The device is also easy to install and configure, thanks to its plug-and-play design and intuitive web-based interface. The switch is equipped with advanced features such as VLAN, QoS, and IGMP Snooping, which allow you to optimize your network for maximum efficiency and performance. Additionally, the NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH supports a wide range of network protocols, including IEEE802.3, IEEE802.3u, IEEE802.3af, and IEEE802.3at.If you're looking for a reliable and high-performance PoE switch that can power multiple devices and optimize your network for maximum efficiency, the NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is an excellent choice.
NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is a highly efficient and reliable network switch that is perfect for small to medium-sized businesses. With a total of 10 ports, including 8 POE ports and 2 RJ45 ports, this switch is capable of handling multiple devices at once, making it ideal for use in offices, schools, and other similar settings. The 8 POE ports provide Power over Ethernet (POE) support, allowing you to power and connect various devices such as IP cameras, wireless access points, and VoIP phones. This eliminates the need for additional power supplies and simplifies the setup process. The switch also features a standard POE design that ensures compatibility with a wide range of devices. It is also equipped with advanced energy-saving technologies that help reduce power consumption and lower operating costs.
The NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is easy to install and configure, thanks to its plug-and-play design and intuitive web-based management interface. It also comes with a durable metal housing that provides excellent durability and protection against damage. In summary, if you're looking for a reliable, efficient, and easy-to-use network switch that can handle multiple devices, the NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is an excellent choice. It offers advanced features, energy-saving technologies, and durable construction that ensures long-lasting performance and reliability. NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is a reliable and efficient network switch that is perfect for small to medium-sized businesses. With eight PoE ports, it can provide power and data transmission to PoE-compatible devices such as IP cameras, wireless access points, and VoIP phones. This switch is easy to install and use, thanks to its plug-and-play design. It also features two non-PoE ports that can be used for connecting other devices such as desktop computers or printers. The switch supports a maximum power output of 120W, which is more than enough to power multiple devices simultaneously.
The NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is also designed to be energy-efficient, helping businesses save on energy costs. It uses advanced power-saving technology that can automatically detect the power consumption of connected devices and adjust its power output accordingly. This helps to ensure that devices are not overpowered, which can lead to unnecessary energy consumption. Overall, the NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is a reliable, efficient, and cost-effective network switch that can help businesses improve their network performance and reduce energy costs.
NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is a powerful and reliable networking device that allows you to connect multiple devices to a single network. With8 POE ports and 2 RJ45 ports, this switch is perfect for small to medium-sized businesses looking to expand their network capabilities. This switch supports the IEEE802.3af/at Power over Ethernet (POE) standards, which allows you to power compatible devices through the Ethernet cables, eliminating the need for separate power cables. This feature is particularly useful for devices like IP cameras, wireless access points, and VoIP phones. The NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is designed for easy installation and setup. It features a plug-and-play design, which means you can simply connect your devices and start using the switch right away. Additionally, this switch is compact and lightweight, making it easy to install in tight spaces. This switch is also built to last. It features a durable metal casing and has been rigorously tested to ensure it can withstand the demands of a busy network environment. It also includes built-in surge protection to help prevent damage from power surges and lightning strikes. Overall, the NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is an excellent choice for businesses looking to expand their network capabilities. With its advanced features, easy installation, and rugged design, it is sure to provide reliable performance for years to come.
NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is an exceptional networking solution for small to medium-sized businesses. This switch provides eight Power over Ethernet (POE) ports that allow you to connect and power up to eight devices, such as IP cameras, VoIP phones, and wireless access points, without the need for additional power cables. The P110C also features two standard RJ45 ports that support gigabit Ethernet connectivity, allowing for lightning-fast data transfer rates up to 1000Mbps. With ten ports in total, this switch provides you with plenty of flexibility to connect all of your network devices. The P110C is incredibly easy to install and configure, thanks to its plug-and-play design. Simply connect the switch to your network and start using it immediately. This switch also features a durable metal casing that ensures it can withstand the rigors of daily use. Overall, the NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is an excellent choice for businesses looking to expand their network infrastructure. Its POE capabilities, gigabit Ethernet support, and easy installation make it an ideal solution for a wide range of networking applications.
NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is an ideal solution for small to medium-sized businesses that require efficient and reliable network connectivity. With8 standard POE ports and 2 RJ45 uplink ports, this switch is capable of providing power and data transmission to up to 8 devices simultaneously. This switch offers a maximum power output of 123W, ensuring that all connected devices receive sufficient power for optimal performance. The compact design and easy-to-use interface make it simple to set up and manage, while the durable metal casing ensures that it can withstand the demands of constant use.
The NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH supports IEEE802.3af/at standards, which means it can provide power to a wide range of devices, including IP cameras, VoIP phones, and wireless access points. It also supports VLAN and QoS features, allowing you to easily manage network traffic and prioritize bandwidth for critical applications. Overall, the NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is an excellent choice for businesses that require a reliable and efficient network switch that can provide power and data transmission to multiple devices simultaneously. With its ease of use and advanced features, it is an essential tool for any modern business.
NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is a high-performance network switch designed for small to medium-sized businesses and homes. With eight Power over Ethernet (PoE) ports and two RJ45 ports, this switch is perfect for connecting a range of devices such as IP cameras, wireless access points, and VoIP phones. This switch supports the IEEE802.3af/at standard for PoE, which means it can automatically detect and provide power to compatible devices. With a total PoE power budget of 123W, the NETIS P110C can power up to eight devices simultaneously without the need for additional power cables or adapters.
The NETIS P110C is also equipped with two RJ45 uplink ports, which allow you to connect the switch to your existing network or to another switch for expanded connectivity. This switch supports a range of network protocols including VLAN, QoS, and IGMP Snooping, which help to optimize network traffic and ensure high-quality data transmission. In addition, the NETIS P110C is easy to install and configure. With its plug-and-play design, you can simply connect your devices and start using the switch immediately. The switch also features a compact design, making it ideal for use in small spaces. Overall, the NETIS P110C8POE2RJ4510 Ports STANDARD POE SWITCH is a reliable and cost-effective solution for small to medium-sized networks. Its PoE capabilities, uplink ports, and network protocols make it an excellent choice for businesses and homes looking to expand their network connectivity.
Warranty: 01 Year